1
INSTRUCTION MANUAL FOR THE MGG AETERTEK WIRELESS DOG/CAT
CONTAINMENT SYSTEM MODEL AT-216F
TRANSMITTER SETTING
Open the package, take out the transmitter, align the RF antenna at the RF
connector, rotate clockwise and tighten the nut.
Charge up the power bank according to the instructions enclosed with it. This power
bank will power the transmitter for 50+ hours use. Please get into the habit of
charging it up as soon as it is down to two lights showing or at least twice a week
and turn off the transmitter when not in use by unplugging it from the power bank.
Once the power bank is charged, connect it to the DC jack of the transmitter and the
transmitter will go into standby mode. The antenna symbol in the display will start
flashing indicating that the transmitter is ready. The lower right corner shows the
current power.
The transmitter coverage distance can be adjusted via the up and down buttons from
one to fifty metres. The centre of the display shows the approximate current
distance between the transmitter and the boundary limit set. Adjust the level
according to your needs. Level 00-10 is a gauge for setting the boundary distance.
The higher the value the further the coverage distance. The centre of the display will
Increase/decrease
Boundary Diameter
Icon Flashes when
transmitting
Control Collar functions
Beep, vibrate on/off and
shock correction levels
Comments to this Manuals